Brakes/Levers/Pads

- Adjustable cable pull for linear, mechanical disc, caliper, or cantilever brakes - Forged AL6061 alloy construction - 2-finger lever design - Return spring with reach and cable adjustment - 22.2mm (7/8") knee-friendly clamp - 200g pair

Suitable for moderate use applications - All-around performance in mixed weather conditions - Good performance at high or low temperatures - Great pad life - Quieter than sintered pads - Material: Steel - Compound: Semi-Metallic - Compatibility: Shimano M900,M9020,M988,M985,M8000,M785,M675,M666,M615,R785,RS785,R515,R315,S700,CX75 FSA K-Force/Afterburner

Pre-bled hydraulic disc brake kit - 22mm dual piston post-mount caliper - Mineral oil compatible - Semi-metallic pads - Adjustable reach lever - Includes mounting hardware, IS adapter, spare barbed fitting & olive ferrule - Uses Origin8 disc brake pad models 120393/120281/120295 - Hose length: 1700mm hose (160mm rotor), 850mm hose (180mm rotor)

- Cable-actuated flat-mount mechanical disc-brake caliper - "Plug and Play" dual piston caliper for improved braking performance over single-piston designs - Dual-piston brake-pad actuation prevents rotor deformation - Compatible with both 140mm and 160mm front and rear rotors - Fully adjustable design featuring pad in/out fine-tuning - Includes mounting hardware and FM adapter - Uses Origin8 disc brake pad models 120563/120564/120565

The short blade design of the Origin-8 Mini Trigger Brake Lever gives a clean, sleek look—with great stopping power—to your handlebars. • Designed for caliper & cantilever brakes • Cold forged double bent lever blade • 1-finger lever blade • 22.2mm (7/8") clamp • Short blade design • Left hand • 76g each

Stainless steel outer and alloy inner w/ torx mounting bolts - Alloy inner inceases heat dissipation caused by braking - Dovetail design and spring pin connection allows true "float" and prevents brake load on pins

- Suitable for light use applications - Good performance at low temperatures - High-density ceramic organic compound for extended pad life - Low rotor wear - Extremely quiet

- Lightweight 2-piece alloy cartridge design - Advanced alloy rim braking compound provides superior performance in both dry and wet conditions - Fully integrated angle adjustment - Automatic toe-in alignment - Oversized tire deflector - Length of Pad: 55mm - Compound: All Weather

Replacement brake hoods for Origin8 Pro Force road levers

Origin-8's Pro Pulsion Classic Road Caliper offers excellent braking power for road bikes. A dual pivot design provides solid stopping power and the forged aluminum construction keeps the weight low. A variety of reaches ensure proper fitment and the vast array of colors and finishes let you match your ride, or add an accent.

Suitable for moderate use applications - All-around performance in mixed weather conditions - Good performance at high or low temperatures - Great pad life - Quieter than sintered pads - Pad material: steel - Compound: semi-metallic - Compatibility: Magura MT5, MT7

Suitable for moderate use applications - All-around performance in mixed weather conditions - Good performance at high or low temperatures - Great pad life - Quieter than sintered pads - Pad material: steel - Compound: semi-metallic - Compatibility: Apse,Zoom DB250/350/450/550

Suitable for moderate use applications - All-around performance in mixed weather conditions - Good performance at high or low temperatures - Great pad life - Quieter than sintered pads - Pad material: steel - Compound: semi-metallic - Compatibility: Avid Elixir-1,3,5,CR,R / SRAM XO,XX

- Available in both short- and long-pull versions - Forged AL6061 alloy construction - 3-finger lever design with laser-etched grip pattern - Return spring with reach and cable adjustment - 22.2mm (7/8") knee-friendly clamp - 195g pair

Replacement brake hoods for Origin8 Classique Sport road levers

Improve your braking in dry and wet conditions with Origin-8's Pro-Force Post Pad Set. They fit most cantilever brakes and boast a grippy dual-compound material with channels to shed water for excellent performance and long life. They are also designed to reduce noise.

6-Bolt mounting pattern - Wide leg design improves rotor`s lateral stiffness for a consistent and firm braking surface - Stainless steel construction - Torx bolts included

- 55mm brake pad inserts for Origin8 Vise road cartridge brake pads - Advanced carbon rim braking compound provides superior performance in both dry and wet conditions - Automatic toe-in alignment

- Cable-actuated post-mount mechanical disc-brake caliper - "Plug and Play" dual-piston caliper for improved braking performance over single-piston designs - Dual-piston brake-pad actuation prevents rotor deformation - Suitable for both front and rear wheel use - Available in both a Road/Cross/Gravel version, as well as a MTB-specific design - Fully adjustable design featuring pad in/out fine-tuning - Includes mounting hardware and IS adapter - Uses Origin8 disc brake-pad models 120393/120281/120295

Origin-8 1mm Disc Brake Washers. Works with most disc brake calipers. Ideal for mounting/spacing applications. - Stainless steel - 6mm I.D. - 10 per bag

- Ergonomic lever design with integrated brake release - Aluminum/composite construction - Compatible with mechanical disc and linear pull brakes - Fits 23.8 – 24.2mm handlebars - 320g pair

Origin-8's Disc Rotor Bolts are made of a corrosion-resistant steel, have Torx heads and come in a complete set of 6. They're perfect for attaching your disc brake rotor to the hub.

- Lightweight 1-piece, co-molded pad design - Advanced alloy rim braking compound provides superior performance in both dry and wet conditions - Fully integrated angle adjustment - Automatic toe-in alignment - Length of Pad: 70mm - Compound: All Weather - Pad Color: Black - Hardware Color: Black

Origin-8 Classic Linear-Pull Brakes are a great upgrade or replacement brake for your ride. Available in both front and rear, they feature forged aluminum construction with dual hex screw tension adjustment for simple set-up.

Origin-8's Classique Sport Road Levers deliver modern braking performance with a classic look. They're made of light and tough forged aluminum with composite bodies and ergonomic rubber hoods for top comfort. They are perfect for use with sidepull, centerpull and cantilever brakes and also have quick-releases for opening your brakes for easier wheel removal/installation.

Origin-8's Multi-Sport Bar End Levers are for caliper and cantilever brakes and can be used on touring, base and areo-extension handlebars. They're made of light and reliable forged aluminum for excellent braking power and long life. - Forged AL6061-T6 alloy construction - Compatible with caliper & cantilever brakes - Fits 19-20.5mm ID bar ends - 160g pair

Suitable for heavy use applications - Excellent in extreme weather conditions - Superior performance at high temperatures - Virtually unaffected by rain or snow - Exceptional pad life - Pad material: steel - Compound: sintered - Compatibility: SRAM Force22, Red22, Rival22

- Suitable for heavy use applications - Excellent in extreme weather conditions - Superior performance at high temperatures - Virtually unaffected by rain or snow - Exceptional pad life - Pad Style ID: 31 - Compatibility: Shimano M8020/M820/M460 / TRP Quandiem - Pad Material: Sintered - Backplate: Steel

- 55mm brake pad inserts for Origin8 Vise road cartridge brake pads - Advanced alloy rim braking compound provides superior performance in both dry and wet conditions - Automatic toe-in alignment - Length of Pad: 55mm - Compound: All Weather

Converting from V-brake to disc? Plug the holes with Origin-8 Boss Plugs. Boss plugs provide a finished look to your brake conversion while also preventing moisture and debris from getting into your bike. - Fits into fork brake boss holes for V-brake to disc conversion