The only thing left to do is answer. No matter where the call beckons, the MTR can get you and your ride there. Designed with versatility at its core, the MTR (aka: modular tray rack) can transport a variety of bikes and can be easily customizable with add-on trays to bring your whole collection of shredders or ride-share with friends. Each MTR rack is built from American-made steel and aluminum for maximum durability. Roomy wheel trays swallow bike tires up to 5 inches wide for a stable hold, while dual-arm wheel holders keep bikes locked in position – and keep the paint chip-free. It’s all built on a rugged hitch-based foundation that can be tilted away, when fully loaded with bikes and without, for fast and easy vehicle access – because after all, those snacks aren’t going to pass themselves. Plus, the MTR’s nesting bike trays make for easy-on, easy-off loading. No more lifting bikes over the rack – simply flip the trays out of the way as needed to get you from parking lot to trailhead in record time. The Saris MTR also available in a 1-Bike version. Product Features - Modular: carries 2 bikes, up to 60 lbs, and can be customized with Add-On to transport up to four bikes. - Pivot away: unique wheel trays pivot and nest for easy loading and compact storage. - Dual-arm holders are compatible with a wide range of tire sizes, and never touch the bike's frame. - Full Tilt: tilting mechanism for easy hatch access. - Complete Integrated Security: locks the rack to the car and the bikes to the rack. - Designed to be used with 2" hitch receivers only. - Tray-style hitch bike rack - Carries 2 bikes, up to 60 lb. each - Customizable to carry more bikes with 1-Bike Add-On and 2-Bike Add-On - No assembly needed - Rack folds up for compact storage when not in use. - Tool-free installation - Rack weight: 55 lb - Adjustable wheel block to accommodate wheel sizes from 20 inches up to 29 inches and tire sizes as wide as 5 inches - Integrated locking cable secures bikes to the rack - Locking hitch pin secures rack to the car - Accommodates wheel bases up to 53 inches - 2" hitch compatible - Constructed from American-made aluminum and steel, and tested to outlive the elements
DrTray is the ultimate tray rack for your hitch. It can easily handle road, mountain, and fat-tire bikes with up to 5” tires. Bike clearance is top notch, with 18” between the trays. To make it even better, the bike tray spacing can be adjusted tool-free while the bikes are loaded, virtually eliminating any issues with bike-to-bike interference. The ergonomic remote tilt lever is intuitive to use and allows quick access to the rear of the vehicle as well as a convenient carrying handle. Its locking SpeedKnob delivers simple and secure vehicle attachment, and exceptional bike theft protection is built in with a burly SKS cable lock system. Plus, DrTray is adaptable – add an EZ+1 to carry a third bike! - Weighs in at only 34 pounds– the lightest rack in its class. (2” receiver Model only) - Securely carries 26” to 29” wheels and tires up to 5” wide - Unrivaled spacing between bikes - up to 18” between each bike - Tool-free adjustment while bikes are loaded minimizes the potential for bike-to-bike interference - Easy-to-use remote tilt lever and lightweight, aluminum design makes raising and lowering the rack a breeze - Tool-free locking SpeedKnob for a secure and easy install to your vehicle - Extra burly SKS cable lock system for each bike secures both wheels and frame - Add the EZ+1 and carry a third bike (2” receiver model only, sold separately) TECHNICAL SPECS - Weight: 34.00 lbs - Dimensions: L 16.00” x W 54.00” x H 11.50”
Choose your own adventure with the MTR 1-bike hitch rack. Whether you’re feeling me-time or party time, the MTR can adjust for any occasion. The secret is in the MTR’s modular design (after all, MTR stands for “Modular Tray Rack”). Simply add or remove trays to securely haul between one and three bikes to wherever the trail may lead. When you’re ready to hit the road, feel free to take the scenic route. Rugged enough to handle the harshest of environments, the MTR is built with American-made steel and aluminum. Complete with versatile and sleek nesting trays with dual-arm wheel holders, the MTR can carry nearly any rig – from Junior’s MTB to downhill to your favorite eBike – securely, in style and without ever coming into contact with your bike’s frame. The Saris MTR also available in a 2-Bike version. Product Features - Modular: carries 1 bike, up to 60 lbs, and can be customized with Add-On to transport up to three bikes. - Pivot Away: unique wheel trays pivot and nest for easy loading and compact storage. - Dual-arm holders are compatible with a wide range of tire sizes and never touch the bike's frame. - Full Tilt: tilting feature allows easy hatch access without removing bikes. - Complete Integrated Security: locks the rack to the car and the bikes to the rack. - Tray-style hitch bike rack. - Carries 1 bike, up to 60 lb. - Customizable to carry more bikes with 1-Bike Add-On and 2-Bike Add-On - No assembly needed. - Tool-free installation. - Rack weight: 35 lb - Adjustable wheel block to accommodate wheel sizes from 20 inches up to 29 inches and tire sizes as wide as 5 inches. - Easily folds up when not in use. - Integrated locking cable secures bikes to the rack. - Locking hitch pin secures rack to the car. - Accommodates wheel bases up to 53 inches. - Universal hitch: fits 1 ¼” and 2” hitches out of the box. - Constructed from American-made aluminum and steel, and tested to outlive the elements.
Super rugged platform carrier with frame free clamping security for all types of bikes. - Carrier easily folds when not in use and tilts away from vehicle for rear access due to the HitchSwitch lever - Secure bikes quickly without frame contact with the frame free ratcheting arm - Bike to bike interference is eliminated with fully adjustable bike mounts - Ideal for carbon frames, mountain, downhill, and fat bikes as it fits 20 - 29” wheels and up to 5” tires without adapters - Includes STL (SnugTite Lock) for locking rack to receiver hitch - Carries 2 bikes - Carries up to 4 bikes with Thule T2 Classic Bike Add-on (sold separately, 2” receiver only)
The all-new aluminum Sherpa 2.0 resets the standard for user-friendly adventure. Folding tire cradles create an abundance of clearance while Kuat's foot-actuated pivot lever lets you bask in the glory of carrying a bike or eating a breakfast burrito while unfolding your rack at the same time. With features designed around your lifestyle, this lightweight rack is as easy to take off as it is to leave on. - Re-designed pivot with optional foot assist - Semi-integrated bike lock - Front tire ratchet design with an intuitive release - Rear tire cradle features a co-molded strap to protect wheels - Folding front cradle adds space between rack and vehicle - No-tool install with hand tight hitch cam system - Gloss metallic powder available in 3 colors - Low profile arced design delivers an amazing look - 2 Bike capacity up to 40 lbs. each - Holds wheelbases up to 47-inch and tires as large as 3-inch - Increased spacing between bikes to 14-inch - Lightweight platform rack design as low as 32lbs (assembled) - Available in both 2-inch & 1.25-inch hitch sizes
Want all the innovations of our revolutionary Glide rack, but only need to transport a couple of rides? This 2-bike hanging hitch rack has you covered. The Glide EX 2-bike features the same noteworthy and one-handed glide action of its Glide brethren, plus a beefed-up bike spec: the ability to carry 50 lb per bike. Yep, that's right - this hanging hitch bike rack is eBike compatible. Simply push the trigger to release the rack, glide away and boom – hatch access. When you’re done, the same amount of (non) effort glides the rack upright and you’re good to go. It’s the same one-button, one-step, one-motion movement for when the hitch rack is fully loaded and when it’s not. Product Features - eBike Friendly: this hanging hitch bike rack transports 2-bikes, up to 50 lb each. - Convenient, one-step access to the back of the car - fully loaded with bikes or not. - Innovative four-bar linkage system controls the center of mass, creating a smooth, glide-action away from the vehicle. - Complete integrated security: locks the rack to the car and the bikes to the rack. - Hanging hitch style bike rack. - Carries 2 bikes, up to 50 lb. each. - One-button glide action provides instant access to rear of vehicle, both with bikes loaded and without. - No assembly needed. - Rack weight: 37 lb. - Bike hold downs are easy to use and quick to load. - Best-in-class ratchet straps speedily fasten bike to the rack. - Integrated locking cable secures bikes to the rack. - Locking hitch pin secures rack to the car. - Universal hitch: fits 1 ¼” and 2” hitches out of the box. For use with receiver hitches Class II or higher. - Built and tested to outlive the elements.
Transport your recumbents and save your back, too, with Hollywood's Sport Rider Recumbent rack that carries up to 2 'bents. Simply set your recumbent into the wheel holders (that are nice and low for easy mounting), then slide the padded universal clamp over the frames to secure them in place. This great rack fits recumbents with up to 74-inch wheelbases and includes small wheel adapters and extra tie downs to keep your rig in place. And, the Sport Rider folds up when not in use for easy storage and transportation. - Hitch Size: fits both 1 ¼ and 2-inch - Space between bikes: 18-inches - Not to be used on any trailer, fifth wheel or towed vehicle - Max weight capacity: 45 lbs per bike
Expand your Yakima HoldUp hitch rack (sold separately) to carry 4 bikes by adding their HoldUp Plus 2 Add-On Kit. With it, you can haul 4 bikes of any size, from stout BMX bikes to long cruisers and heavy DH bikes with no need for adapters. Side-to-side adjustability ensures a perfect fit and minimizes bike-to-bike interference. This sturdy rack sports heavy cast wheel trays and Yakima's adjustable StrongArm retainers that hold the bikes by the wheels for superior stability and super-quick loading.
Kuat's Transfer 2 offers all the Kuat quality you'd expect at a price that appeals to privateer racers and weekend riders alike. It fits both 1.25 and 2-inch trailer hitches and its stout steel construction won't leave you hanging, or your precious cargo bouncing around on the road. Bikes mount securely and easily with an adjustable locking arm and wheel tray. Best of all, there's no contact with the frame so your bike will come off the rack looking just as good as when you put it on. The wheel trays hold up to a four-inch-wide tire and the rack holds bikes with wheels anywhere from 20 to 29 inches.
For around-town jaunts and cross-country excursions, Hollywood's Road Runner 4 is a great solution for carrying four bikes. Hollywood's rubber separators with integrated straps and a lower tie-down bar hold the bikes fast and ensure they won't bump each other. And, even when loaded, this rack easily tilts out of the way for rear access, and it folds down when not in use. Plus, Hollywood's No-Wobble system eliminates slack between the hitch and rack for extra stability. The Road Runner 4 also includes a keyed-alike locking hitch pin and 8-foot locking cable for total security and convenience. - Weight: 32 lbs - Max weight capacity: 35 lbs per bike - Not to be used on any trailer, fifth wheel, or towed vehicle
Light, strong, and always ready to roll, the SingleSpeed hitch rack is built for solo travel. Ready for any kind of bike – road, mountain, fat, or BMX – the StrongArm hook ensures your bike is secure and protected, holding the bike tight by the wheels, and babying those carbon frames and painted surfaces. The locking SpeedKnob makes install a breeze & an integrated SKS bike lock is included to keep your two wheeler secure. - Light, compact, and built for one bike, this hitch rack makes for quick & easy solo travel - Lightweight, hitch mounted tray rack that carries one bike without frame contact - StrongArm hook secures bike at wheels, protecting painted surfaces and carbon frames - Tool-free locking SpeedKnob makes installation and removal fast, easy and secure - Folding wheel cup and compact design keeps the rack out of your way when not in use - Fits most bikes, including fat-tire, mountain, road, hybrid, women’s specific, & BMX - Accommodates disc brakes, through axles, boost hubs, and full suspension bikes - Fits 20” to 29” wheel sizes and tires up to 5-inch wide - Integrated SKS (Same Key System) lock included for added bike security - Fits both 1.25-inch & 2-inch hitch receivers right out of the box
Imagine for a moment if you can…for the same cash you spent on that overhyped, overly complex hanging style rack, you could get your hands on the Küat Transfer. This budget-friendly beast boasts stout steel construction that won’t leave you hanging. - 1-Bike Add-On sold separately (For 1-Bike Transfer rack only) - No contact with bike frame - Spring-loaded foot pedal at pivot - PerfectFit adjustment system ensures your bike will fit - Available security upgrades include locking hitch pin and integrated cable locks - Fits both 1.25 & 2-inch receivers - Fits 20-29-inch tires - Holds up to a 4.5-inch tire (with use of the Phat Bike Kit – sold separately) - Max Wheelbase: 47-inches - Max weight per bike 45 lbs. - Weight: 26 lbs.
Yakima's HitchSki is an attachment for your hitch-mounted rack (sold separately) that enables you to carry skis and snowboards. Simply swap the HitchSki for your bike attachment and you now have a rack that can be used year-round. It hauls up to six pairs of skis or four snowboards without the risk of damage thanks to rubber-padded arms. And, Yakima's SKS locks are included to prevent theft.
This is a one bike add-on to turn your MonoRail 2-inch (sold separately) into a three bike carrier. Simply remove the end cap from the MonoRail, slide the attachment in and it quickly secures with two bolts. The cable lock included with the MonoRail is long enough to secure all three bikes. Simply and easy. Not compatible with 1.25-inch MonoRail.
Page 1 of 1