Filter By:
Pedals
$1,199.99
Rally XC200 is tested to the extreme, so you can ride there too. This dual-sensing power meter delivers reliable power measurements and is easy to transfer between bikes, no matter what bike you're on or where you're riding.
- Impeccably Designed Pedal—Rally power meters have undergone rigorous testing to increase reliability. Featuring a superior design with sensors housed inside, these sleek pedals install like any pedal. And they're quick to transfer between bikes.
- Advanced Cycling Dynamics—In addition to total power and cadence, Rally XC200 measures much more. These metrics help you identify your strengths and weaknesses, so you can work to improve.
- Left/Right Balance—Measure power from your left leg versus power from your right leg to get a better look at how symmetrically you're producing power.
- Seated vs. Standing—Track the amount of time you spend in each position and gauge position effectiveness.
- Power Phase—Get a clear look at where you're producing power in the pedal stroke.
- Platform Center Offset—Ensure proper cleat position by keeping track of where power is applied on the pedal.
- Cleat Compatibility—For a comfortable ride, these pedals are designed to fit your favorite Shimano SPD cleats.
- Transferable Spindle—From road to gravel to cyclocross and much more, keep riding year-round with a transferable spindle that can be installed in the Rally RS/Rally RK road pedal body kits (each sold separately).
- Battery Life—Make sure you're ready for those long rides and training sessions with up to 120 hours of battery life.
Specs:
- Battery type: LR44/SR44 (x4)
- Battery life: up to 120 hours (with LR44 battery type)
- Weight: 316g
- Water resistance: IPX7
- Max. rider weight: 105kg
- Accuracy: +/- 1.0%
- Cleat type: Shimano SPD
- Q-factor: 53/55mm with supplied spacing washer
- Stack height: 13.5mm
- Field calibration
- Adjustable release tension
- Garmin Connect
- Measurement location: Spindle
- Communication: ANT+ and Bluetooth
In the Box:
- Rally XC200 pedals
- Cleat hardware
- 55mm Q-factor washers
- Documentation
$699.99
Rally XC100 is tested to the extreme, so you can ride there too. This single-sensing power meter delivers reliable power measurements and is easy to transfer between bikes, no matter what bike you're on or where you're riding.
- Impeccably Designed Pedal—Rally power meters have undergone rigorous testing to increase reliability. Featuring a superior design with sensors housed inside, this pedal installs like any other pedal. And it's quick to transfer between bikes.
- Reliable Readings—By reliably measuring your cadence and forces detected on the left pedal, Rally XC100 doubles the value to provide total power. Want more metrics? Upgrade later to the dual-sensing system (sold separately).
- Cleat Compatibility—For a comfortable ride, this pedal is designed to fit your favorite Shimano SPD cleats.
- Transferable Spindle—From road to gravel to cyclocross and much more, keep riding year-round with a transferable spindle that can be installed in the Rally RS/Rally RK road pedal body kits (each sold separately).
- Battery Life—Make sure you're ready for those long rides and training sessions with up to 120 hours of battery life.
Specs:
- Battery type: LR44/SR44 (x4)
- Battery life: up to 120 hours (with LR44 battery type)
- Weight: 316g
- Water resistance: IPX7
- Max. rider weight: 105kg
- Accuracy: +/- 1.0%
- Cleat type: Shimano SPD
- Q-factor: 53/55mm with supplied spacing washer
- Stack height: 13.5mm
- Field calibration
- Adjustable release tension
- Garmin Connect
- Measurement location: Spindle
- Communication: ANT+ and Bluetooth
In the Box:
- Rally XC100 pedals
- Cleat hardware
- 55mm Q-factor washers
- Documentation
$649.99
BREAKTHROUGH POWER
Built on the cutting-edge SPEEDPLAY pedal platform, POWRLINK ZERO delivers reliably accurate power and cadence data in a race-proven pedal system. This powerful combination creates an unrivaled power pedal that helps cyclists optimize performance to break through to the next level.
A POWERFUL COMBINATION
POWRLINK ZERO combines proven sports science and years of industry-leading research with the superior adjustability, increased power transfer, reduced weight, and enhanced aerodynamics of the SPEEDPLAY platform to create a pedal system that delivers a distinct performance advantage.
BETTER YOUR BEST
Accurate to +/- 1%, POWRLINK ZERO’s internal gyroscope removes cadence variation to measure power output more precisely. Combined with Wahoo’s sports-science based algorithms, cyclists get accurate values they can use to achieve next-level performance gains.
LASTING POWER
POWRLINK ZERO is made with premium materials for superior strength-to-weight ratio – making it perfect for enduring efforts. In addition, the rechargeable battery lasts up to 75-hours per charge to give you the power to go long. Really long.
In the box
- Left Power Pedal and Compatible Right Pedal
- Washer (x2)
- Cleat Assembly
- Screw Packet
- Charging Cable and Clips
- Quick Start Guide
- Important Product Information Guide
Additional Tools Required for Assembly: #1 and #2 Philips Head Screwdriver and 8mm Allen Wrench"
$450.00
Crank Brothers' Candy 11 is the pedal to sate a racer's sweet tooth. This customizable pedal boasts integrated traction pad technology to refine fit, feel and power transfer, while titanium components shave weight. A ribbed body helps your foot grab the pedal body when you've unclipped, though the four-sided entry will have you engaged and off on the first try. Rely on chamfered edges to reduce rock-strikes, and a hex alloy end cap bash guard to help minimize damage to the pedal body.
$405.00
Crank Brothers' Eggbeater pedals are 4-sided, making them super easy to enter and exit. Their open design makes them shed mud and debris quickly, and they feature 6-degrees of knee-friendly float. The Eggbeater 11s boast titanium axles, wings, and bodies, stainless-steel springs, and inner needle bearings. Crank Brothers has also made the Eggbeater internals water-tight for excellent durability and consistently smooth pedaling.
$350.00
The world’s most successful downhill pedal is now available in a premium edition featuring titanium wings and dual-chamfered edges to minimize weight and maximize performance. The Crank Brothers Mallet DH 11 is designed and engineered for the rider who wants the best of the best, and nothing less.
- Titanium wings for reduced weight
- Dual chamfered edges to reduce rock-strikes
- Exclusive double-anodized black and gold colorway
- Concave platform for secure foothold
- 8 adjustable pins per side for grip
- Traction pad technology customizable interface
- Ribbed body for better traction when unclipped
- 57mm q-factor for stability at speed
- 4-sided entry / superior mud shedding
- Customizable float & release angle
- Premium bearings & double seal system
- Spindle material: forged SCM 435 chromoly steel
- Body material: 6061-T6 aluminum
- Wing material: 6AL/4v titanium
- Spring material: 300 series stainless steel
- Release angle 15° / 20°
- Max rider weight no restriction
- Q-factor 57mm
- Inner bearing type: IGUS LL-glide bearing
- Outer bearing type: Enduro cartridge bearing
- Endcap hex alloy
- Cleat: Premium brass cleats with shims included
- Weight: 445 grams
$350.00
The Crank Brothers Mallet E 11 is the premium version of the ideal enduro racing pedal. The specs say it all.
- Titanium wings to reduce weight
- Dual chamfered edges to reduce rock-strikes
- Exclusive double-anodized black and gold colorway
- Concave platform for secure foothold
- 6 adjustable pins per side for grip
- Traction pad technology to optimize the shoe/pedal interface
- Ribbed body for better traction when unclipped
- 52mm q-factor for maneuverability on tight trails
- Hex alloy endcap for durability
- 4-sided entry / superior mud shedding
- Customizable float & release angle
- Premium bearings & double seal system
$349.99
The PEMBREE R1V elevates the platform pedal to a whole new level of performance and durability. The replaceable Traction Rails and Pins combined with the concave pedal body provide unrivaled grip and support for the rider.
The SKF sealed ball and needle bearings will provide many years of maintenance-free riding and a dedicated spindle seal will keep even the worst of the winters out.
All Traction Pins, bolts, and nuts as well as the spindle are stainless steel providing strength and corrosion resistance.
$300.00
Size-specific, premium concave platform pedal provides optimal shoe/pedal interface.
- Titanium spindle for weight reduction
- Optimal surface area
- Minimal profile: 11mm-13mm thin
- Concave platform for secure foothold
- 10 adjustable pins per side for grip
- Premium bearings and seal system
- Stamp Small: Recommended for shoe sizes: 5-10 (US) // 37-43 (EU)
- Stamp Large: Recommended for shoe sizes: 10-15 (US) // 43-49 (EU)
- Spindle material 6AL/4v titanium
- Body material: 6061-T6 aluminum
- Footprint: 100mm x 100mm (Small)/114mm x 111mm (Large)
- Weight: 299 grams per pair (Small)/325 grams per pair (Large)
- Adjustable pins 10 per side
$287.00
Ride with rage without compromising safety. This is what best defines the X-TRACK EN-RAGE, our top-of-the-line enduro pedal. The PLUS Ti model features a titanium axle for added strength and improved stiffness all while shaving grams. The wide, forged aluminum body on all PLUS models will increase stability and support across the most challenging terrain.
- Technology: X-Track
- Cleats: X-Track Cleat included (Easy Cleat available separately)
- Cleats standard: SPD compatible
- Retention: 6 to 14
- Body: Forged Aluminum
- Spindle: Titanium
- Platform area: 664mm²
- Platform width: 67mm
- Stack height + cleats: 16.8mm (10.7 + 6.1mm)
- Weight (pedal): 200g
- Weight (pair + cleats): 450g
- Float angle: 6°
- Release angle: 13°
$279.99 - $280.00
- Excellent Pedaling Efficiency
- Optimized Balance Of Weight And Rigidity
- Injection Molded Carbon Composite Body
- Hollow Cleat Bolt
- Efficient Power Transfer
- High Stability
- Extra-Wide Platform
- Efficient Power Transfer/Durability
- Reduces Flex And Pedal Body Wear
- Stainless Steel Body Plate
- Excellent Pedaling Efficiency
- Smooth Rotation
- 2-Ball Bearing, 1-Wide Roller Bushing
- Reliable Durability Performance
- Stable And Uniform Load Distribution
- Wide Bearing Placement
- Rider Tune
- Customize The Entry And Release Tension Settings
- Adjustable Entry And Release Tension Settings
- Shimano 3-Year Limited Warranty
- Average Weight: 224g
- Shimano SPD-SL cleats included
- Standard (52mm)
- Wide (56mm)
$279.99
Whether gunning for the podium or just wanting to finish strong, the Speedplay Aero road pedal is aerodynamically engineered to defy wind and boost speed with less effort. The unique 3-axis adjustability allows you to dial in your cleat positioning, micro-adjust your float up to 15 degrees, and decrease your stack height for the most aerodynamic fit on your bike.
Speedplay is the only pedal system to provide independent fore-aft, left-right, and float adjustability to optimize fit and enhance performance through better biomechanics.
By integrating Speedplay's advanced pedal platform into Aero's streamlined design, a pedal profile is created that minimizes drag, helping you achieve faster finishes and shattered PRs.
- Weight: 224g (per pedal pair)
- Spindle Material: Stainless Steel
- Spindle Length: 53mm
- Float: Fixed-15º Micro-Adjustable
- Cornering Angle: 39º
- Bearing: Sealed
$264.00
The X-TRACK RACE CARBON Ti pedals are specifically created for the most unforgiving courses. The mechanism is designed for easy engagement in all conditions and helps to shed mud and debris when clipping in. The carbon body offers a large contact area, while the titanium axle ensures the pedal is stiff and light: a mere 145 grams underfoot.
- Technology: X-Track
- Cleats: X-Track Cleat included (Easy Cleat available separately)
- Cleats standard: SPD compatible
- Retention: 6 to 14
- Body: Carbon
- Spindle: Titanium
- Platform area: 515mm²
- Platform width: 60mm
- Stack height + cleats: 16.8mm (10.7 + 6.1mm)
- Weight (pedal): 145g
- Weight (pair + cleats): 340g
- Float angle: 6°
- Release angle: 13°
$230.00
- Evo+ series features ultra-thin body for improved ground clearance reduced Q-factor and a lower center of gravity
- Extruded CNC machined aluminum body with dual DU bushings and EVO bearings
- 10 replaceable pins per side
$179.00 - $219.00
- 2-sided clipless pedal for gravity riders
- Large platform extruded and CNC machined aluminum body
- Updated cage with front plates and bevelled edges
- 685zz sealed bearings and IGUS bushing
- Adjustable cleat engage/release tension on each side
$169.00 - $204.00
- Larger platform aluminum body with 2-sided clipless mechanism for DH/AM use
- Low profile machined aluminum platform
- Triple sealed bearings with DU bushing
- Adjustable cleat engage/release tension on each side
- X1 4d & 8d cleats replaceable pins
$139.50 - $203.50
The OneUp Aluminum Pedals features a huge (115x105mm) super grippy platform with 10 rear-loading hexagonal steel pins per side to keep your feet planted on even the roughest of trails. With a weight of only 365g, the OneUp Aluminum Pedals won't slow you down on the climbs.
Designed from stealth rubber down and shaped with a subtle convex profile to provide you with more grip thanks to the pedals sitting in the natural arch of your foot. The ultra-thin design (only 8mm at the leading edge) gives you maximum clearance to reduce pedal strikes and deflect off trail obstacle. Clip Less, Ride More.
When it s finally time to service your bearings, the unique cassette tool lock ring system makes re-greasing the bearings exceptionally fast and easy.
FEATURES
- 10 rear loading custom hexagonal removable pins per side for maximum grip
- Ultra thin leading edge chamfered design to deflect off any obstacle
- Fully sealed and serviceable design with built in bearing extractor
- Wide platform design for increased stability
- Contoured shape provides ultimate connected feel
SPECS
- Weight: 365g
- Platform Size: 115x105mm
- # of Pins: 10 per side
- Axle Material: Chromoly steel
- Height: 8.3-12mm
- Pin to Axle distance: 112mm
- Color: Black, Green, Grey, Blue, Orange, Red, Purple, OilSlick
- Body Material: 6061-T6 Aluminum
COMPATIBILITY
- Currently, due to the deep counterbore of the crank arms, these pedals are not compatible with SRAM Carbon cranks.
- These pedals are not compatible with crank boots without modification to the crank boots. We recommend removing crankboots before installation.
$200.00
Shimano Ultegra R8000 pedals.
- Pro-level performance and lightweight for the enthusiast
- The legacy of Shimano design, quality and performance
- Carbon-composite body
- Extra-wide platform for a more efficient transfer of power
- Adjustable entry and release tension settings
- 4mm longer axle available
- Low stack height
- 0.7mm lower than PD-6800
- Model Number: PD-R8000
- Series: Ultegra
- Pedal System: SPD-SL
- Average Weight: 248 grams
$199.95
Wolf Tooth Ripsaw Aluminum Pedals feature a slim, lightweight design with a slight convex profile. The large, asymmetric machined aluminum platform provides strong foot support for all-mountain riding, while the thin convex profile is just 7mm thick at the leading edge. Inside the pedal are three fully sealed cartridge bearings, a stainless steel axle, a igus bushing, and a custom radial seal to protect internal components against trail debris.
Slim Convex Profile
Ripsaw pedals are 12.5mm thick in the center and just 7mm thick in the front and rear edges. This profile is supportive and comfortable for all riders, while performing exceptionally well for riders who prefer pedaling with a mid-foot position or for shoes that do not have much structure or support.
Extra Grip
Each side of the pedal has 12 stainless steel rear-loading 4.5mm pins for loads of traction. An additional six 4.5mm pins ship with the pedal. Shorter 3mm pins are available as replacement parts to customize the convexity of the pedal; by installing shorter pins on the edges, the convex profile is emphasized.
Formed with Purpose
The slight convex profile of the pedal body is tallest at the pedal spindle. The shape then tapers toward each edge from there. This profile aligns perfectly with the arch of your foot and provides a strong platform for power transfer.
Reliable Performance
Three low-friction, fully sealed cartridge bearings and one igus bushing with a custom radial seal protect internal components against trail debris for riding in all conditions.
Precision Machining
Each Ripsaw Aluminum Pedal body begins as a billet of raw aluminum. After 37 minutes in our CNC mills, the result is a beautifully crafted pedal body that is ready for anodizing and assembly. If you’re a nerd for machining, you’ll appreciate the intricate gradients and machine paths.
$199.95
Wolf Tooth Waveform Aluminum Pedals are designed for all-mountain riding, from XC to downhill. They are engineered to lock in your foot with a shape that matches your shoe, rear-loading pins for grip, and a dual-concave profile to further cradle your feet. The pedals come in two sizes, and are proportionally scaled to provide a supportive platform shaped to match the footprint of your shoe. Large is 112mm x 106mm, small is 105mm x 99mm.
Dual-Concave Profile:
- Waveform pedals are 14mm thick on the perimeter and just 12.5mm thick in the center. This profile cradles your foot, front to back and side to side.
Extra Grip:
- Each side of the pedal has 11 stainless steel rear-loading pins for loads of traction. An additional six pins ship with each set of pedals and they are available as replacement parts.
Shaped with Purpose:
- The shape of Waveform Aluminum Pedals matches the footprint of your shoe
Reliable Performance:
- Three low-friction, fully sealed cartridge bearings and one igus bushing with a custom radial seal protect internal components against trail debris for riding in all conditions.
Tapered Edges:
- Large, tapered leading edge to deflect pedal strikes on rocky, rooty terrain
Two sizes:
- Large: 112mm x 106mm - 384g
- Small: 105mm x 99mm - 373g
Each size is proportionally scaled to match the silhouette of your shoe based on foot size or pedal size preference.
$197.00
The Dagga is our brand new DH pedal. It was designed in collaboration with Chris Kovarik – one of the forefathers of downhill and flat pedal riding. Kovarik's unique and high-impact riding style inspired the Dagga's key features – our largest platform and widest stance ever.
- Meant to be ridden with thick-soled shoes, the Dagga offers improved stability, power and articulation of the bike.
- The Dagga features the same high strength chromoly axle system as other models with a double seal, inner bushing and outer cartridge bearing.
- Largest Q-Factor, largest body, longest and largest amount of pins!
$195.00
- Pedal Weight (pair): 260g
- Size: 102 X 96 X 11 mm
- Body Material: magnesium extruded / CNC machined
- Spindle: CNC machined, cr-moly
- Pedal Bearings: thrust bearings / IGUS bushings
- Pins: replaceable SAP (1/8" x 8mm) pins
$190.00
When it’s time to update the flagship XTR pedals, we look at every detail under a microscope. Off-road racing demands speed, focus, and control. And that’s exactly what the PD-M9120 delivers. Increased drivetrain efficiency, an intuitive and seamless interface, and predictable steering and traction control are the benchmarks of the M9100 series pedals. The M9120 are the weapon of choice for WC racers worldwide.
BETTER MUD CLEARANCE
- Cylindrical contact area sheds mud even better for consistent stepping-in & out performance and rider confidence.
ADDED EFFICIENCY + DURABILITY
- Increased axle strength for long service life. M9100 comes in two axle lengths – 52 mm and 55 mm crank to pedal center.
LARGER CONTACT AREA
- The M9120 platform is designed for maximum shoe-to-pedal contact area without extra weight or rotating mass. Cage protects the binding and makes step in easy.
BETTER MUD CLEARANCE
- Wider edge-to-edge contact area provides solid shoe-to-pedal interface, transmits power more efficiently for faster and more consistent acceleration, and better bike control.
$189.99
The ultimate pedal for enduro riding and racing, with a longer spindle.
- Concave platform for secure foothold
- 6 adjustable pins per side for grip
- Integrated traction pad technology to optimize the shoe/pedal interface
- Ribbed body for better traction when unclipped
- Chamfered edges to reduce rock-strikes
- 57mm q-factor for increased shoe clearance and control
- 4-sided entry / superior mud shedding
- Customizable float & release angle
- Premium bearing & double seal system
$189.00
The Baldwin offers the best of both worlds bridging the gap between the demands of XC racer to the enduro rider. It features the tried and true Posi-Lock retention system protected by a robust 6061 CNC body providing extra support.
- Weight: 292g Ti
- Body: 60661 CNC AL
- Spindle: Titanium
- Bearings: 3 Cartridge
- Springs: SWP
- Cleat: XPEDO XPT (6° Float)
*Titanium spindles have 180lbs weight limit.
$145.00 - $185.00
- 2-sided clipless pedal for All Mountain/Enduro use
- Small platform extruded and CNC machined aluminum body
- Updated cage with bevelled edges
- Sealed 686zz bearing and IGUS bushing
- Adjustable cleat engage/release tension on each side
$145.00 - $185.00
- 2-sided clipless pedal ideal for BMX and gravity use
- SX features fixed front springs for unparalleled spring tension eliminating unclipping under maximum load
- Small platform extruded and CNC machined aluminum body
- Sealed 686zz bearing and IGUS
$180.00
Flat or clipless pedals? The question may arise, but not anymore thanks to the GEO TREKKING commuter range of pedals. This robust aluminum pedal is flat on one side and SPD-compatible on the other, with the added security of the VISION light system for when the ride turns dark.
- Technology: Hybrid pedals = half flat + half clipless
- Cleats: X-Track Easy
- Cleats Standard: SPD compatible
- Release angle: 13°
- Retention: 5-10
- Body: Aluminum
- Traction: 8 traction pins
- Spindle: Chromoly+
- Platform width: 83mm
- Weight (pedal): 247g
- Weight (pair + cleats): 550g
- Light included: Yes (x2)
- Light modes: 3 (steady/flash/flash eco)
- Battery Life: Up to 30h (flash eco)
- Light Output: 15 lumens
- Battery: Micro USB rechargeable (cable included)
- Charging time: 50 min
- Beam angle: 180°
$180.00
When it’s time to update the flagship XTR pedals, we look at every detail under a microscope. Off-road racing demands speed, focus, and control. And that’s exactly what the PD-M9100 delivers. Increased drivetrain efficiency, an intuitive and seamless interface, and predictable steering and traction control are the benchmarks of the M9100 series pedals. The M9100 are the weapon of choice for WC racers worldwide.
BETTER MUD CLEARANCE
- Cylindrical contact area sheds mud even better for consistent stepping-in & out performance and rider confidence.
ADDED EFFICIENCY + DURABILITY
- Increased axle strength for long service life. M9100 comes in two axle lengths – 52 mm and 55 mm crank to pedal center.
BETTER MUD CLEARANCE
- Wider edge-to-edge contact area provides solid shoe-to-pedal interface, transmits power more efficiently for faster and more consistent acceleration, and better bike control.
$180.00
Specialized's Boomslang Platform Pedals are insanely thin, yet still wickedly strong. A tapered outside pedal edge provides maximum grip and ground clearance, while the super low-profile design—a mere 10mm at the center—is like a direct telepathic line from your body to the bike. Custom undercut pins provide incredible traction and are simple to remove, and should one break during your ride, each pedal carries four hidden pins for easy replacement.
- Super slick, patent pending, spindle design
- Super low-profile design; 10mm thickness at center
- Custom undercut pins provide “clip in” style grip and easy removal
- Pedal body carriers 4 hidden pins for easy replacement of broken pins
- Tapered outside pedal edge for maximum grip and ground clearance
- Large foot platform for modern day DH, 110x108mm
Page 1 of 9
Next page