Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Wheels

DT Swiss XMC 1200 Spline 30
$1,224.00 - $1,672.00
The XMC 1200 SPLINE is for anyone who enjoys high-speed climbing and descending. Fit with tubeless tires, the full carbon hookless rim massively reduces the chance of punctures, is super-light, and at 30mm rim width, works to perfection with wide all mountain rubber. The SPLINE hub is the lightest wheel hub ever built by DT Swiss, together with the bladed top end spokes and a perfect DT Swiss wheel build, it complements the carbon rim for the ultimate trail bike wheel set.
DT Swiss XMC 1200 Spline 30 27.5-inch Rear
$1,672.00
The XMC 1200 SPLINE is for anyone who enjoys high-speed climbing and descending. Fit with tubeless tires, the full carbon hookless rim massively reduces the chance of punctures, is super-light, and at 30mm rim width, works to perfection with wide all mountain rubber. The SPLINE hub is the lightest wheel hub ever built by DT Swiss, together with the bladed top end spokes and a perfect DT Swiss wheel build, it complements the carbon rim for the ultimate trail bike wheelset.
Shimano Dura-Ace R9100 C60 Carbon Clincher Wheelset 700c
$1,644.99
Shimano's Dura-Ace C60 carbon clincher wheelset provides improved rigidity thanks to a wide flange hub and offset rim so you can reach that next level of aerodynamic performance. - For the performance driven triathlete and road racer - Wide section rim - Ultra-light full carbon rim
Rohloff Speedhub 500/14 XL (170mm)
$1,633.50
- Ideal for pedaling a fatbike through the harshest conditions - 14-speed internal rear hub drivetrain system shifts under load - Disc compatible: requires Rohloff specific 4-bolt rotor (sold separately) - Reliable, low-maintenance internal design for reduced wear - Highly efficient with no gear overlap and maximum ratio range - Shift indexing originates at the hub, instead of the shifter - Includes 14-speed twist shifter, 16t cog, cables, and housing Technical data - Suitable for 170mm frame spacing (10mm diameter axles) - Quick-release (CC) or bolt-on (TS) axle options - Chainline = 71.5mm (15,16 & 17 tooth sprockets), beltline = 72.25mm - Flange spacing (middle-middle) = 93mm - 32 spokes - Disc-brake compatible (DB) - Anodized black finish - XL version is not authorized for tandem use - Weight: 1805 grams
DT Swiss XRC 1200 Spline 25
$1,185.00 - $1,633.00
The new standard in modern day, high performance cross ccountry wheel sets. Coming with a generous 25mm wide hookless full carbon and tubeless-ready rim, the XRC 1200 SPLINE 25 strikes the perfect balance between low weight and aggressive riding readiness. The lean, CNC machined hubs are super-light while the 25mm tall rim has the inherent stiffness necessary for efficient riding and to precisely hold a line. Together with the renowned DT Swiss build quality, this wheel is what everyone looking to go fast up and down has been waiting for.
DT Swiss EXC 1200 SPLINE 30 Rear
$1,606.90
Learning from our very successful EWS riders, we designed the rims for the EXC 1200 SPLINE 30 to be tough enough for everything the best in the sport can throw at them yet light enough to spin all day. And, they're the right width to accommodate today's high-volume enduro tires. This rim is complemented by our completely new top-end Ratchet System hubs which maintain the lightweight theme, as do the bladed and butted straight-pull spokes. The result is any enduro rider's dream wheel: Peace-of-mind in the downhills and enough breath for a chat on the climbs.
DT Swiss EXC 1200 SPLINE 35 Rear
$1,606.90
Learning from our very successful EWS riders, we designed the rims for the EXC 1200 SPLINE 35 to be tough enough for everything the best in the sport can throw at them yet light enough to spin all day. And, they're the right width to accommodate today's high-volume enduro tires. This rim is complemented by our completely new top-end Ratchet System hubs which maintain the lightweight theme, as do the bladed and butted straight-pull spokes. The result is any enduro rider's dream wheel: Peace-of-mind in the downhills and enough breath for a chat on the climbs. - SRAM XD MTB cassette-compatible
DT Swiss XMC 1200 SPLINE 30 27.5-inch Rear
$1,606.90
The XMC 1200 SPLINE 30 is the ultimate all-mountain wheel. A carbon layup specifically tuned for all-mountain use makes the rim tough, yet super-light. And, with a 30mm internal width, it's made for wide rubber. The hubs feature the latest incarnation of our Ratchet System for smooth, rapid engagement and reliability. Extremely refined machining and fully lasered graphics make them the lightest hubs DT Swiss has ever made. Together with bladed, top-end spokes and perfect DT Swiss build quality, this wheelset is made to ride trails with speed and confidence. - SRAM XD MTB cassette-compatible
DT Swiss XMC 1200 SPLINE 30 29-inch Rear
$1,606.90
The XMC 1200 SPLINE 30 is the ultimate all-mountain wheel. A carbon layup specifically tuned for all-mountain use makes the rim tough, yet super-light. And, with a 30mm internal width, it's made for wide rubber. The hubs feature the latest incarnation of our Ratchet System for smooth, rapid engagement and reliability. Extremely refined machining and fully lasered graphics make them the lightest hubs DT Swiss has ever made. Together with bladed, top-end spokes and perfect DT Swiss build quality, this wheelset is made to ride trails with speed and confidence. - SRAM XD MTB cassette-compatible
DT Swiss XRC 1200 SPLINE 25 Rear
$1,606.90
Featuring the new generation Ratchet System hubs that are lighter and faster than ever before, along with bladed spokes and the superb wheel build quality and reliability you expect from DT Swiss, the XRC 1200 SPLINE 25 is a race-bred trail machine that loves to go fast. It accelerates like nothing else, tracks like nothing else, and is reliable like nothing else. It is the benchmark for high speeds on any trail, on any gravel road, and in any race — whether that race takes place between the tape or in your head. - SRAM XD MTB cassette-compatible
DT Swiss XRC 1200 SPLINE 30 Rear
$1,606.90
When you pair the latest ultra-light DT Swiss Ratchet System hubs with an XC-tuned 30mm internal-width carbon rim, you get a precision tool for XC domination. Its 28 bladed, high-end DT Swiss spokes and master wheel builder quality make the XRC 1200 SPLINE 30 extremely capable over gnarly roots and rocks, up climbs and down descents, all while more than light enough to gain an edge attacking out of tight switchbacks. - SRAM XD MTB cassette-compatible
Campagnolo Shamal Mille Wheelset
$1,600.00
Shamal Mille, Campagnolo's most sought-after aluminum wheelset now features a C17 rim so the wheels can be fitted with wider and more comfortable tyres. This means better reactivity and an improved riding experience. The wheels are very lightweight despite the extra 2 mm added onto the profile. Looks matter too! The ceramic coating on the braking rim coupled with the black self-locking nipples make Shamal Mille the coolest wheel in the entire Campagnolo range. Racers will notice that the braking surfaces spiral effect facilitates late, modular and safe braking, particularly in wet conditions. - Every gram matters. The differentiated deep-section rims make the Shamal Mille an incredibly light wheel - Aluminum spokes with aerodynamic profile make the wheel extremely reactive while also making it lightweight - Oversize flange on the drive side perfects torque transmission, boosting reactivity whenever the cyclist changes pace -USB bearings guarantee smooth rolling performance that's twice as superior to the regular bearings currently being sold on the market - Carbon-fiber hub body reduces weight to a minimum and provides a high degree of lateral stiffness - Plasma Electrolytic Oxidation finish gives these wheels a unique and distinctive total black look. - Braking rim allows reduced stopping distances even in adverse conditions - Surface of the brake pad contact area offers outstanding brake modulation
Specialized Roval Traverse 38 SL Fattie 27.5 148
$1,600.00
While there may be a linear relationship between increased tire size and increased fun, this relationship only holds true when wider tires are paired with the correct width rims. Having a 2.8", or high-volume, tire mated to a narrow rim makes for a squirmy, poor handling experience, and when you’re on the hunt for additional fun, these characteristics are undesirable. Lucky for you, the new age of traction, stability, and speed has arrived—and its name is the Traverse 38 SL Fattie 27.5. Along with light overall weight, stiffness, and durability, another top priority for the Traverse SL was ease of use. First off, we got rid of the creaky straight-pull spokes and corrosion-prone alloy nipples. Next up, we landed on 28 J-bend spokes, for front and rear wheels, that are all the same length—making it easy to find replacements if needed. And finally, we engineered a new hub design, with a wider profile and higher flange to aid in overall stiffness. While our 38-millimeter Traverse SL is already wider than most offerings, the benefits of three-inch tires become more apparent with a proper rim interface. In search for the proper width, our engineers tested various iterations, from 30 to 45 millimeters, to determine where the sweet spot lies. What they ended up with is a 38-millimeter internal rim width that turns the Traverse 38 SL Fatties into descending machines. A wide internal rim width endows riders with a variety of advantages that are exemplified even more with plus-sized tires. The extra width allows for more tire volume, translating into more supple ride qualities, and better support for the tire, meaning that you'll experience less "burping" when riding tubeless and a drastic increase in traction. After determining the proper rim width for the plus-sized application, we began designing the rim using the same low-weight, high-strength technologies used in the Traverse SL and the Control SL. With this, we started with our Zero Bead Hook design that effectively eliminates the biggest weak spot found in traditional rims, and topped it off by using high-modulus carbon fiber to keep the weight down. And to further this theme, the wheels also include the Roval tubeless plug system, which sheds an additional 50 grams-per-wheel compared to a rim strip Each Traverse 38 SL Fattie is hand-built to our own alloy hubs with DT Swiss Competition Race spokes. Inside our hubs, you'll find sealed cartridge bearings all-around, and a quick-engaging 54t DT Swiss star ratchet system in the rear that allows you to power over rocks and roots without delay. And while machines do a decent job of building wheels, we choose professionally trained humans to build ours, as they catch various flaws that a machine would otherwise miss.
Specialized Roval Traverse SL Fattie 27.5 148
$1,600.00
Trail wheels often fall into two categories—they’re either heavy and durable or light and flexy. And because of this, a lightweight, wide-profile, and enduro-ready carbon wheel seems like something only found in a fairytale, but lucky for you, we made it a reality. The Traverse SL Fattie 27.5 puts all the flick'able, nimble features you need in an all-mountain wheel into one package, and it has the results to prove it. Along with light overall weight, stiffness, and durability, another top priority for the Traverse SL was ease of use. First off, we got rid of the creaky straight-pull spokes and corrosion-prone alloy nipples. Next up, we landed on 28 J-bend spokes, for both the front and rear wheels, that are all the same length—making it easy to find replacements if needed. And finally, we engineered a new hub design, with a wider profile and higher flange to aid in overall stiffness. What's with the big-boned name, you ask? The Traverse SL Fatties may be wide, but with a 30mm inner rim width, they’re far from the girth of a fat bike rim. But let's talk width. You've probably noticed that mountain bike rim widths have hovered between 19 and 23 millimeters for decades, and they've been long overdue for a change. In the search for a better wheel design, our engineers began testing 2.3- to 2.5-inch tires on 45-millimeter-wide fat bike rims to see what, if any, benefits could be found. It only took them a few rides to realize that the wider rims offered a variety of advantages, like adding additional tire volume, which better supports the tires in hard cornering, greatly improves traction because of the ability to run lower pressures, and noticeably increases rim stiffness. They did note that there is an occurrence of diminishing returns with increasing width, however, and after testing everything from 25 to 45mm, determined that a 30mm inner width is optimal. After determining the width, we began designing the rim using the knowledge that we gained when developing the Control SL. With this, we started with our Zero Bead Hook technology that gets rid of the weak spot found in a traditional wheel, and combined it with the wider profile to make a carbon rim that effectively dissipates forces. This way, you can take abuse from rocks without the worry of cracks or dents. Ok, so they’re strong, impact-resistant, and tire supporting—they must be heavy, right? Wrong. Even though “fattie” is in their name, they're far from fat. To achieve this weight, we hand-build our rims to our own alloy hubs, using only the highest quality DT Swiss Competition Race spokes. Inside our hubs, you'll find DT Swiss 240 internals with a quick engaging 54t DT Swiss star ratchet system in the rear that allows you to power over rocks and roots without delay. And while machines do a pretty good job of building wheels, we choose professionally trained humans because they do so with an artistic touch that makes for minimal flaws. Whether you need a carbon wheelset to get you through an enduro stage or one to shred your local rock garden, the Traverse SL Fattie has you covered.
Specialized Roval Traverse SL Fattie 29 148
$1,600.00
Trail wheels often fall into two categories—they’re either heavy and durable or light and flexy. And because of this, a lightweight, wide-profile, and enduro-ready carbon wheel seems like something only found in a fairytale, but lucky for you, we made it a reality. The Traverse SL Fattie 29 puts all the features you need in an all-mountain wheel into one package, and it has the results to prove it. Along with light overall weight, stiffness, and durability, another top priority for the Traverse SL was ease of use. First off, we got rid of the creaky straight-pull spokes and corrosion-prone alloy nipples. Next up, we landed on 28 J-bend spokes, for both the front and rear wheels, that are all the same length—making it easy to find replacements if needed. And finally, we engineered a new hub design, with a wider profile and higher flange to aid in overall stiffness. What's with the big-boned name, you ask? The Traverse SL Fatties may be wide, but with a 30mm inner rim width, they’re far from the girth of a fat bike rim. But let's talk width. You've probably noticed that mountain bike rim widths have hovered between 19 and 23 millimeters for decades, and they've been long overdue for a change. In the search for a better wheel design, our engineers began testing 2.3- to 2.5-inch tires on 45-millimeter-wide fat bike rims to see what, if any, benefits could be found. It only took them a few rides to realize that the wider rims offered a variety of advantages, like adding additional tire volume, which better supports the tires in hard cornering, greatly improves traction because of the ability to run lower pressures, and noticeably increases rim stiffness. They did note that there is an occurrence of diminishing returns with increasing width, however, and after testing everything from 25 to 45mm, determined that a 30mm inner width is optimal. After determining the width, we began designing the rim using the knowledge that we gained when developing the Control SL. With this, we started with our Zero Bead Hook technology that gets rid of the weak spot found in a traditional wheel, and combined it with the wider profile to make a carbon rim that effectively dissipates forces. This way, you can take abuse from rocks without the worry of cracks or dents. Ok, so they’re strong, impact-resistant, and tire supporting—they must be heavy, right? Wrong. Even though “fattie” is in their name, they're far from fat. To achieve this weight, we hand-build our rims to our own alloy hubs, using only the highest quality DT Swiss Competition Race spokes. Inside our hubs, you'll find DT Swiss 240 internals with a quick engaging 54t DT Swiss star ratchet system in the rear that allows you to power over rocks and roots without delay. And while machines do a pretty good job of building wheels, we choose professionally trained humans because they do so with an artistic touch that makes for minimal flaws. Whether you need a carbon wheelset to get you through an enduro stage or one to shred your local rock garden, the Traverse SL Fattie has you covered.
Shimano Dura-Ace R9100 C40 Carbon Clincher Wheelset 700c
$1,579.99
The lightweight Dura-Ace C40 Carbon Clincher wheelset is the ultimate all-rounder. Yet, it’s still aero thanks to the wide rim you’ll see at the C40. This carbon wheelset has an increase in rigidity for improved aerodynamic performance, while maintaining a comfortable riding experience. Its braking, handling and acceleration are top notch. - Responsive acceleration - Wide section rim - Carbon laminate rim
DT Swiss ERC 1400 Spline 47
$1,092.00 - $1,514.00
Our benchmark setting Aero+ rim matched to a punchy mix of top end aerolite and laced to premium Ratchet System hubs makes for a wheel that delivers in all riding situations. Fitting 28 mm tires on its wide rims will give you all the comfort and grip needed for extended rides on mixed surfaces. At the same time, in combination with 25 mm rubber, the ERC 1400 SPLINE with will aero optimize your race bike, ready for you to set your own, new benchmarks.
DT Swiss PRC 1400 Spline 35 Disc
$1,092.00 - $1,514.00
Unsure what will happen on your group ride? Mountains, hills, or flats? Water from below, water from above? You needn't worry, the PRC 1400 SPLINE 35 has it covered. High-end, bladed straight pull spokes and the most reliable and lightweight freewheel system make for an efficient ride. Offering the perfect blend of comfort, grip, and low weight in combination with a higher volume tire, these wide and stiff full carbon rims accelerate with the best of them.
DT Swiss PRC 1400 Spline 35 Non-disc
$1,079.00 - $1,501.00
Unsure what will happen on your group ride? Mountains, hills, or flat sections? Water from below, water from above? You needn't worry — the PRC 1400 SPLINE 35 has it covered. High-end bladed straight pull spokes and the most reliable and lightweight freewheel system make for an efficient ride. Offering the perfect blend of comfort, grip, and low weight in combination with a higher volume tire, the wide and stiff full carbon rims accelerate with the best of them.
Roval Traverse 38 SL Fattie 650b 148 Wheels
$1,500.00
The age of traction, stability, and speed has arrived, and its name is the Roval Traverse 38 SL Fattie 650b wheels. They feature 148mm rear and 110mm front axle widths, but to turn them into descending machines is the 38mm internal rim width. The extra width also allows for more tire volume, which means increased suppleness in the ride quality. And not only this, but the ample width also better supports the tire, meaning that you'll experience less "burping" when riding tubeless. These wheels also include the Roval tubeless plug system, which is an easy and super lightweight solution for tubeless setups. At the front hub, you'll get a 15x110mm thru-axle (end cap options included), and at the rear, the hub features DT Swiss internals for quick engagmenet. And to top everything off, these wheels are hand-built to ensure a painstaking attention to detail. -Please note that this 148 version is exclusively designed for use with bikes designed with 110x15mm front axle and 148mm rear axle standards.
Roval Traverse SL Fattie 29 148
$1,500.00
The Roval Traverse SL Fattie 29 148 wheels work to provide more traction, stability, and speed. The extra width also allows for more tire volume, which means increased suppleness in the ride quality. And not only this, but the ample width also better supports the tire, meaning that you'll experience less "burping" when riding tubeless. These wheels also include the Roval tubeless plug system, which is an easy and super lightweight solution for tubeless setups. At the front hub, you'll get a 15 x 110mm Boost thru-axle (end cap options included), and at the rear, 12 x 148mm Boost hub. The rear hub features DT Swiss internals for lightning-quick engagement. And to top everything off, these wheels are hand-built to ensure a painstaking attention to detail. Please note that this 148 version is exclusively designed for use with bikes designed with 110 x 15mm front axle and 148mm rear axle standards. - Rider Weight Limit: 240lb (108kg)
Zipp 808 Firecrest Carbon Clincher Tubeless Disc Brake 700c Rear
$1,500.00
There’s nothing middle of the road about the 808 Firecrest. At 82mm deep, it’s all out aero. Thanks to refinements to Zipp’s revolutionary Firecrest rim shape to be tubeless compatible and optimized for wider tires, the 808 Firecrest Carbon Clincher Tubeless Disc brake is ideal for the new era of disc brake road riding and racing. Without the constraints of rim brake caliper compatibility or brake-track requirements, the Firecrest Carbon Clincher Tubeless Disc-brake wheels offer the increased stopping power and modulation of disc brakes and a whole lot more. To maximize the aero performance of the wheels, Zipp’s ABLC dimples extend all the way to the outer edge of the disc-specific rims. The wheels are also optimized for wider tires to meet the performance needs of modern riders in search of low rolling resistance and aero efficiency with high comfort. The deeper Firecrest Tubeless Disc brake has an internal width of 19mm and are aerodynamically optimized for 25mm wide tires. This design improves Firecrest’s ability to yield low aerodynamic drag and high crosswind stability, a combination called AeroBalance. Designed to be tubeless compatible, the wheels feature a rim bed made with internal ridges to lock the tire’s bead in place, ensuring secure performance even when ridden at lower tire pressures. Zipp’s low rolling resistance and high grip Tangente RT28 and RT25 Road Tubeless tires pair well with the Firecrest disc brake wheels. A new carbon fiber layup for the Indianapolis-made rims keeps weight low while maintaining the Firecrest Carbon Clincher’s proven durability. The robust 77D/177D hubset, paired with 24 Sapim CX-Sprint spokes front and rear, keeps the wheels stiff and responsive. To ensure compatibility with any bike, the versatile 77D/177D hubs come with swappable end caps to work with QR’s and thru-axles, including 12x100mm and 15x100mm front thru-axles as well as 12x142mm rear thru-axles. The 177D rear hub is also XDR driver body compatible for use with SRAM 10-42 cassettes. Each Wheel Includes: - Zipp Tangente Quick Release Skewer - Zipp Tubeless valve – factory installed - Tubeless rim tape – factory installed - Valve core removal tool - Zipp 77D/177D thru-axle caps to fit 12x100, 15x100 dropouts for front wheels, and 12x142 dropouts for rear wheels - Freehub body spacer – 11 to 10 speed - SRAM XDR driver body for 177D available separately
Ritchey WCS Carbon Vantage Wheelset: 27.5-inch Boost Center Lock Tubeless
$1,499.00
The WCS Vantage wheel is as advanced as it gets, but shares DNA with earlier Ritchey models raced to numerous National and World Cup podiums in the 1990’s. Those decades of winning heritage beautifully coalesce with modern advancements and standards to produce a mountain bike wheel that’s strong, nimble, and built to perform and win. Featuring a new, wider 3mm tall OCR (Off Center Rim) profile, BOOST hub widths, and incredibly tough monocoque design, the Vantage is at the front of the pack in terms of weight, stiffness, and durability. The OCR build also reduces wheel dish and improves spoke bracing angle for a stronger, laterally stiffer build. The tubeless-ready, 26mm internal-width rim boosts air volume and reduces sidewall flex when riding big tires. - WCS Vantage tubeless 24h OCR rims - Tubeless Ready internal profile - Rim diameter: 27.5" - Rim depth: 25mm - Outer width: 32mm - Inner width: 26mm - Hubs: Ritchey-designed cold-forged WCS hubs with oversized, premium quality cartridge bearings - Front BOOST Hub: 110 x 15mm - Rear BOOST Hub: 148 x 12mm - Spokes: DT Competition Black - Nipples: DT Brass Black - Build: 24/2x - Freehub: alloy - Shimano Center Lock Disc Brake Mount (6-bolt adapters sold separately) - SRAM XX1 (XD) driver available - Matte carbon finish - Weight (27.5): 736g (front) / 817g (rear)
DT Swiss HEC 1400 SPLINE 47 Rear
$1,473.90
With the HEC 1400 SPLINE 47, we offer the perfect endurance wheelset for e-road bikes, delivering all the advantages of the AERO+ concept mixed with e-bike-specific components to ensure a long-lasting and trouble-free ride. A valuable upgrade for any high-end e-road bike, these wheels promise premium performance and aero advantages, along with many envious glances from overtaken riders. - Shimano/SRAM 11-speed road cassette-compatible
DT Swiss HEC 1400 SPLINE 62 Rear
$1,473.90
The HEC 1400 SPLINE 62 is the ultimate e-road bike wheelset with a true racing character and outstanding aerodynamic performance. Specifically developed e-bike components, ensuring a long-lasting and trouble-free ride, this wheelset offers the speed needed when you want to fall-in with the young guns keeping the pace high on your group ride. And let's be honest, the visual appearance of the HEC 1400 SPLINE 62 turns every e-road bike into a head-turner. - Shimano/SRAM 11-speed road cassette-compatible
DT Swiss HGC 1400 SPLINE 42 700c Rear
$1,473.90
While our Hybrid Endurance wheels are made to deliver maximum speed on tarmac, our Hybrid Gravel wheels deliver maximum fun on gravel roads. The HGC 1400 SPLINE 42 is the answer for high-end e-gravel bikes that set the benchmark in a new cycling segment. With a select mix of high-end e-specific hubs, spokes, and rims, this wheelset has the pedigree to be the uncontested King of e-gravel. - Shimano/SRAM 11-speed road cassette-compatible
Campagnolo Shamal Ultra Disc Brake 2-Way Fit Tubeless Wheelset
$1,455.00
The Shamal wheel is already an industry reference point for high end aluminum wheelsets. Now for 2018 Campagnolo have taken their know how and expertise to introduce the new disc brake version. The result is a wheel already famous for its steering, smoothness and versatility that is now also available for those wanting a bike with disc brakes. - Weight: 1592 g MAIN BENEFITS Guaranteed quality and performance - This is the disc brake variant of the famous Shamal Ultra aluminum wheel - Flanges of the alloy hub and carbon fiber spacer in the front Redesigned specifically for disc brakes - Front hub axle HH 12/100 and rear HH12/142 floating axle. QR axles available as accessories - New “road” design of the flange: offering excellent integration with the AFS rotor, it improves transmission of the braking forces Versatile and distinctive - 2-Way Fit version: you can choose whether to use the clincher tire or the innovative tubeless / tubeless ready (using the sealant recommended by the tire manufacturer) - Its black self-locking anodized nipples add a touch of class and keep the spokes in place MAIN FEATURES - 2-WAY FIT VERSION (tubeless + clincher): it makes it possible for the cyclist to use the same rim to choose the best of the two worlds: traditional clincher tire or the innovative tubeless. - 17 mm INNER WIDTH RIM: it creates a perfect balance between weight and performance with 25 mm tires to achieve high levels of comfort. - DIFFERENT HEIGHT FOR THE FRONT RIM: The 27 mm profile on the front rim ensures the maximum rigidity on the point of contact of the nipples. The toroidal milling makes it possible to obtain a 25 mm height in the areas where no additional material is needed, reducing thus the weight and improving wheel rideability. - DIFFERENT HEIGHT FOR THE REAR RIM: the 30 mm profile on the rear rim ensures the maximum rigidity on the point of contact of the nipples. The toroidal milling makes it possible to obtain a 27 mm height in the areas where no additional material is needed, reducing thus the weight and improving the wheel response - FRONT WHEEL SPOKES: 14 aerodynamic aluminum spokes on the braking side and 7 aerodynamic aluminum spokes with a 2/1,6/2 mm section on the drivetrain side. - REAR WHEEL SPOKES: 7 aerodynamic aluminum spokes on the braking side and 14 aerodynamic aluminum spokes on the drivetrain side to ensure aerodynamics and response, transferring to the drivetrain side the braking torque generated on the disc. - ANODIZED SELF-LOCKING BLACK NIPPLES: the prevent the possible rotation of the spokes during the wheel life-cycle. - FRONT HH 12/100 AND REAR HH 12/142 FLOATING AXLE: only one specification to obtain the “Campagnolo performance” also in the transfer of forces to the frame. QR axles available as accessories. - USB (ULTRA SMOOTH BEARING): high quality ceramic bearings for a smooth and frictionless rolling. RING NUT WITH MICRO-ADJUSTMENT: it allows a precise adjustment of the hub. - ALUMINIUM SOLID BODY WITH MEGA-G3 SYSTEM IN THE REAR HUB: it ensures great efficiency in terms of aerodynamics and response thanks to the reinforced braking side to improve the resistance to the torque in the braking phase. - FRONT HUB ALLOY FLANGES AND CARBON FIBER SPACER: the result is a front wheel extremely light and robust. New “road” design of the flange: excellent integration with the AFS disc, it improves the transmission of the braking forces.
DT Swiss ARC 1400 DICUT 48 Rim Brake Rear
$1,441.90
The ARC 1400 DICUT 48 delivers its full potential when your race turns nasty. In gusty wind conditions and on hilly, twisting courses, these wheels give you a decisive advantage, allowing you to stay in the aero position and save valuable power. Small and light riders will love the wheels' superior aero stability, making them a perfect choice for almost every terrain.
DT Swiss ARC 1400 DICUT 62 Rim Brake Rear
$1,441.90
The ARC 1400 DICUT 62 is ideal for flat courses and gusty wind conditions. We developed it for aero stability, which adds to its versatility and makes it the category leader when it comes to low straight-line drag numbers while remaining easy to handle in windy situations. The ARC 1400 DICUT 62 combines SWISS SIDE's leading aerodynamic know-how with our unrivaled components technology.
DT Swiss ARC 1400 DICUT 80 Rim Brake Rear
$1,441.90
With the fastest ARC rim brought down to the 1400 hub level, the aero segment is strengthened significantly. These wheels were developed in partnership with the aerodynamic specialists from SWISS SIDE to help you get up to speed and stay there. They support the complete system of rider and bike with minimal drag and superior aero stability in all conditions for guaranteed fast riding. Finally, this precision wheel is built with high and even spoke tension to give you the reliability you need in the race against the clock.