Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Model Years
  • Show Fewer Model Years

Stems

$42.00 - $45.00
Whisky's No.7 Stem is a lightweight stem with a clean aesthetic. Stems only have a few jobs to do: hold the bars, provide stable support, and look good. Ours does all three admirably. Paired with any of our handlebars, it rounds out the perfect Whisky cockpit. Available in a wide range of lengths to perfect your bike's fit and performance.
$60.00
3D-forged and CNC-machined from 6061 aluminum the Future Stem Comp is optimized for use with all Future Shocks. It's also compatible with our Specialized accessory mount for seamless integration. - 3D-forged and CNC-machined, 6061 aluminum, Future Shock-optimized stem. - Available in 6-degree angles and 60, 70, 80, 90, 100, 110, and 120mm lengths. - Compatible with the Specialized accessory mount.
$36.99
Dimension 25.4 Stem is a fully forged 6061-T6 aluminum stem with 4-bolt handlebar clamp. - 2-D forged AL-6061-T6 - Four-bolt handlebar clamp - 41mm height - Dimension stems are not intended for use with carbon handlebars or carbon steerer tubes - Weight: 130g-180g
$36.99
For cross country and all-mountain riding, Dimension Trail Stems provide a broad array of sizing options, rigorously tested to ISO 4210 Mountain standards. - Constructed with AL-6061-T6 aluminum - Shot-peened finish - Dimension stems are not intended for use with carbon handlebars or carbon steerer tubes
$69.99
All Box stems are engineered and crafted using our Oversized Technology. As we follow the load paths down the handlebars we have focused our attention on the stem-to-bar interface. Since the Oversized handlebars have an increased wall thickness and tube diameter in this sector we have reciprocated with an augmented stem interface with greater surface area. We’ve done this by moving material from low stress areas. This has greatly minimized twist and contributed to responsiveness. As the stem in mated with the handlebars we have contributed to increased pedaling stiffness by providing a backstop to the “lifting” phenomenon. There is no point pushing hard on your pedals if you can’t pull up on your handlebars and deliver that power. Power can easily be lost to handlebar-to-stem deflection and the consequences can be poor power delivery and steering control. When combined with Box’s other Oversized components, you’ll experience heightened responsiveness and reduced latency. Key differences: This particular model stem pushes our Oversized Technology to the extreme as it maximizes the shift of material from low stress zones to the Oversized interface. These stems are engineered for the smaller-sized racers. -Lightweight 3D Hollow Design -Front-Load Clamp Design to Fight Pull-Up Forces -Large Bar Bore -Large Hollow Clamping Bolts -Superior Strength
$229.99
eeSilk Stem is a fatigue-reducing compliance stem that noticeably reduces vibrations on variable surfaces. With up to 20mm of tunable compliance, an easy single bolt external elastomer change and a soft/firm compliance switch – the eeSilk Stem makes any road, no matter the terrain, smoother. - Weight: 225g - 235g - Angle: -6° (only) - Stack Height: 49mm - Stem Clamp: 31.8mm
$203.59
- Full UD carbon construction stem - 4 bolt aluminum faceplate for added rigidity - Stainless steel hardware - Reversible +/-7° angle - 40mm stack height - 125g weight in 100mm length - ISO-Road safety certified
$179.95
You really can have it all-the new WCS C220 stem rivals the performance of the revolutionary C260 stem design, but it's quicker and easier to install and remove, thanks to a press-fit handlebar clamp interface and forward-facing hardware. First proven on the Ritchey TRAIL stem, the C220 handlebar clamp design creates a more secure interface by wrapping a full 220-degrees over the handlebar. Bolt forces are aligned with the clamp so that the stem body 'embraces' the handlebar, which is less prone to damaging lightweight bars. This clamp design allows for a lighter faceplate and stem body with no sacrifice in strength or stiffness. The Carbon Matrix stem body is forged 7075 aluminum with a stiffness-enhancing carbon exoskeleton which makes this 12% stiffer than the WCS alloy C220 stem. Premium quality CRMO steel bolts are used throughout. - Material: 3D forged 7075, carbon encased body - 4 x 4mm coated CrMo steel forward-facing faceplate bolts - 2 x 4mm coated CrMo steel offset steer tube clamp bolts - 5Nm torque max on all hardware - Compatible with all 31.8mm bars - Press-fit clamp design installs and removes like a standard stem - Angle: 84/6 degree - Stack: 42mm - Steerer: 1-1/8" - Faceplate Width: 42mm - Matte UD carbon finish - 126g (110mm)
$59.95
- Bar Clamp Diameter: 31.8mm - Material: Alloy - Stem Angle: +17 degrees, -17 degrees - S.H.I.S. Stem Clamp Diameter: 31.8mm
$99.95
The new Ritchey WCS Toyon stem takes its lead from the original, award-winning Ritchey C220 stem and gives it a more modern shape and increased stiffness for improved handling and greater responsiveness. The Toyon retains the clamping surface area of the C220, which creates a more secure interface by wrapping a full 220° over the handlebar. Its bolt forces are aligned with the clamp so that the body "embraces" the handlebar—a design which is less prone to damaging lightweight bars and allows for a lighter faceplate and stem body with no sacrifice in strength or stiffness. Built from life and all that inspires it, the Toyon builds upon the proven and celebrated C220 design with a fresh, squared aesthetic that adds to the overall harmony of modern frame designs—matching its good looks with enhanced confidence and a more lively feel for wherever your rides take you. - Matching top cap included - 6° of positive or negative rise - 1-1/8" steerer diameter - Stem body wraps 220° around bar clamping area, holding it in place for easy installation - Material: 2014 alloy - Bolts: stainless steel black - Matching top cap included - Angle: 84°/6° - Bar clamp diameter: 31.8mm - Bar clamp width: 44mm - Steerer diameter: 1-1/8" (28.6mm) - Steerer height: 42mm - Weight: 140g (100mm)
$249.95
When stiffness and weight are the top on your list, you want Ritchey's SuperLogic C-260 Carbon Stem. This revolutionary design starts with a bar clamp that wraps a full 260-degrees around the handlebar to distribute clamping stress evenly through the handlebar, faceplate, hardware and stem body. Ritchey's first full-carbon stem, the C-260 features high-modulus carbon for stellar strength-to-weight ratio that translates into a solid but forgiving ride. And, the steer tube clamp uses three bolts and a curved slot to reduce clamp stress on the steer tube, so you can run carbon bars and a carbon steerer with no problem.
$79.95
You really can have it all; Ritchey's WCS C-220 stem features revolutionary stiffness and classically inspired good looks, but it’s quick and easy to install and remove thanks to a press-fit handlebar clamp interface and forward-facing hardware. The C-220 handlebar clamp design creates a more secure interface by wrapping a full 220 degrees over the handlebar. Bolt forces are aligned with the clamp so that the stem body ‘embraces’ the handlebar, which is less prone to damaging lightweight bars. This clamp design allows for a lighter faceplate and stem body with no sacrifice in strength or stiffness. The stem body is forged 2014 aluminum for further weight reduction. Premium quality chromoly steel bolts are used throughout. - Material: 3d forged 2014 alloy body - 4 x 4mm coated CrMo steel forward-facing faceplate bolts - 2 x 4mm coated CrMo steel offset steer tube clamp bolts - 5Nm torque max on all hardware - Compatible with all 31.8 bars - Press-fit clamp design installs and removes like a standard stem - Angle: 84/6 degree - Steerer Height: 42mm - Steerer diameter: 1-1/8" - Faceplate Width: 42mm - Silver Finish - 121g (110mm)
$399.00
A new breed of champion is born. The WCS Carbon Solostreem features a classic bend, UCI-compliant aero top section with short/shallow classic drop, integrated mount ready for K-Edge or similar devices, and underside grooved cable routing for a sleek appearance. It enjoys a matte UD carbon finish and its curved stem clamp greatly reduces steerer stress. - Material: Carbon monocoque with forged alloy steerer clamp - Stem Angle: 84 -degree - Drop/Reach: 126/75mm(Measured center-to-center where the levers mount) - Sweep/Flare: 4.7/1-degree - Features mounting holes for computer/accessory mount - Matte UD carbon finish - Weight: 350g (42cm x 100mm)
$109.95
You really can have it all-the WCS C220 stem rivals the performance of the revolutionary C260 stem design, but it's quicker and easier to install and remove thanks to a press-fit handlebar clamp interface and forward-facing hardware. The WCS C22 84D Stem offers 6-degrees of positive or negative rise. First proven on the Ritchey Trail Stem, the C220 handlebar clamp design creates a more secure interface by wrapping a full 220 degrees over the handlebar. Bolt forces are aligned with the clamp so that the stem body 'embraces' the handlebar, which is less prone to damaging lightweight bars. This clamp design allows for a lighter faceplate and stem body with no sacrifice in strength or stiffness. The stem body is forged 2014 aluminum for further weight reduction. Premium quality CrMo steel bolts are used throughout. - Material: 3D forged 2014 alloy body - 4 x 4mm coated CrMo steel forward-facing faceplate bolts - 2 x 4mm coated CrMo steel offset steer tube clamp bolts - 5Nm torque max on all hardware - Compatible with all 31.8mm bars - Press-fit clamp design installs and removes like a standard stem - Angle: 84/6 degree - Steerer Height: 42mm - Faceplate Width: 42mm - Blatte finish - 121g (110mm)
$300.00
- 100% uni-directional carbon body provides a lightweight structure that is torsionally and laterally stiff - Over rough roads the carbon fiber laminate helps absorb vibration and reduce hand and upper body fatigue - Titanium hardware and lightweight aluminum faceplate - 107g
$49.95 - $52.95
Proven time after time to be a reliable, easily adjustable system that continues to outperform the competition, the 4-Axis stem is a surefire go-to for an entry level stem that has world-class performance. - Bar Clamp Diameter: 31.8mm - Material: Alloy - Stem Angle: 30 degrees - S.H.I.S. Stem Clamp Diameter: 28.6
$79.95
Designed specifically for 1-1/8" steerer.
$179.95
You really can have it all—the new WCS C220 stem rivals the performance of the revolutionary C260 stem design, but it's quicker and easier to install and remove, thanks to a press-fit handlebar clamp interface and forward-facing hardware. First proven on the Ritchey TRAIL stem, the C220 handlebar clamp design creates a more secure interface by wrapping a full 220-degrees over the handlebar. Bolt forces are aligned with the clamp so that the stem body 'embraces' the handlebar, which is less prone to damaging lightweight bars. This clamp design allows for a lighter faceplate and stem body with no sacrifice in strength or stiffness. The Carbon Matrix stem body is forged 7075 aluminum with a stiffness-enhancing carbon exoskeleton which makes this 12% stiffer than the WCS alloy C220 stem. Premium quality CRMO steel bolts are used throughout. - Material: 3D forged 7075, carbon encased body - 4 x 4mm coated CrMo steel forward-facing faceplate bolts - 2 x 4mm coated CrMo steel offset steer tube clamp bolts - 5Nm torque max on all hardware - Compatible with all 31.8 bars - Press-fit clamp design installs and removes like a standard stem - Angle: 84/6 degree - Steerer Height: 42mm - Steerer: 1-1/8” - Faceplate Width: 42mm - Matte UD carbon finish - 126g (110mm)
$45.90
- Keep your steerer tube long without using lots of headset spacers - The classic look of a road race quill stem with a modern threadless headset - Polished silver with laser etch logo - 75 degree angle (-15 deg rise) - Clamp Diameter: 31.8mm (includes shims for 26.0mm handlebars) - Steerer Diameter: 1-1/8"
$29.95
Precision 3D-Net shaped forged shaft interconnects with a precision broached clamp to create a strong, light, and secure stem offering +/-55 degrees range of adjustment. - Adjustable from +40 to -32 degrees - Stainless bar and stem clamp bolts
$184.99
Enduro has unquestionably evolved ever closer to Downhill. The Enduro MK3 Stem is all you need for hitting the trails with wingsuit type accuracy. This Stem was born out of rider's demands for precision and for those moments when you have to be inch-perfect. Taking design elements from our World Cup-winning Direct Mount MK3 Stem and splicing these with our critically acclaimed Enduro MK2 Stem. We developed the Stem specifically with Pro's and Bro's alike. It was obvious we all live for the same challenge of pushing our own limits. As riders, we want a Stem that inspires confidence to change lines through the middle of a rock garden like it's no big deal or slap the inside of a turn and translate all your weight to front-wheel traction. Providing ear-to-ear grins and saying to your mates at the bottom of a trail, "Did you see that?". From the start of the design process, it became clear that we wanted extra rigidity. To yield this, we would need to make the Stem using a forging process - a new thing for us. The result of this allowed us to achieve a more intricate shape than machining alone. It involves applying a huge amount of force to redirect the grain flow of the material. As a result, this gives superior strength, fatigue and impact resistance. Another area where we made a significant improvement in rigidity was by increasing the clamping surface area on the steerer tube. We've vastly increased this to give a stout, rock-solid feel and as close to the MK3 Direct Mount Stem as we could. Furthermore, everything is held securely by stainless steel bolts to ensure there is no rust even in the grimmest weather. In addition and like every Burgtec product, it's fully CNC machined and anodized in all your favourite flavours. Tested with the world's fastest jibbers and sendiest racers, this stem has everything you need to hit all those rowdy racing lines or pull that little bit harder off that big sender. - Forged and Fully CNC machined from AL6061 – T6 Aluminium - Stainless Steel Hardware - Available lengths - 35mm, 42.5mm and 50mm - Available in both 31.8mm (Black only) and 35mm Clamp - Weight: 35mm 138g, 42.5mm 152g, 50mm 160g
$96.00
TruVativ's feathery Stylo T40 Stem is 3D forged from 7050 aluminum for that perfect balance of light weight, stiffness and precision steering control on the trail. Six titanium bolts secure this stem to your fork and bars and keep the weight down, too. Plus, with four different lengths and two color options, you're sure to find the perfect stem with which to crown your ride.
$69.99
EA70 alloy continues to provide an impressive balance of performance and value. From lightweight aluminum tubing, to 3D forging processes and our TopLock technology, Easton alloy stems integrate careful design choices into the lineup. The EA70 stem is also compatible with the ICM integrated Garmin mount. - 3D Forged EA70 Alloy - Easton ICM direct-mount faceplate computer mount compatible - TopLock Design for easy bar installation - Finish: Black Ano - Weight: 132g (100mm/0) - Rise: +/- 7 degrees - Clamp Diameter: 31.8mm - Steerer: 1 1/8"
$21.29
Quill stems are awesome! Classic, effective, and unnecessarily sexy, just like a big feathery quill pen. And if a quill is good enough to write the Declaration of Independence, Hamlet, and Moby Dick, you can bet it's good enough for your bike. Finished with polished silver and available in a -17-degree or +30-degree rise, you can grab one that's just write (boom—punned) for your riding style no matter how relaxed or aggressively you ride! -22.2mm insertion diameter
$19.99
- Aluminum - 4-bolt clamp - 8.5 inches tall - 21.1mm quill diameter
$35.99
• Forged aluminum • Anodized finish • 2-bolt clamp • 150mm tall
$19.99
• Steel • Polished-chrome finish • 1-inch model has 22.2mm quill, 15/16-inch model has 21.1mm quill • 10-inches tall (extra tall)
$37.99
- 3D forged 6061 alloy road stems in 6 or 17 degree angles - Lightweight 4 bolt faceplate - Material: AL6061-T6 - Finish: Sandblasted
$104.00
Chromag's HiFi V2 stem is light and extremely strong for the ultimate control and performance. The HiFi features a blended shape thanks to 3D forging. Chromag contours every surface for human contact and structural optimization. - 3D forging - 175 grams (35mm length) - Low stack height
$37.00 - $39.00
Dimension 31.8 Stems are fully forged 6061-T6 aluminum stems that have a 4-bolt handlebar clamp. - 31.8mm can be used with 26.0 bars with additional shim (SM5317) - Dimension stems are not intended for use with carbon handlebars or carbon steer tubes - Weight: 130g-180g
Page 1 of 6 Next page