Pedals

Crank Brothers' Candy pedals combine 4-sided cages for super-easy entry/exit with composite platforms for top-notch support. The Candy 1s feature chromoly axles for durability, extra secure springs, and an open design to quickly shed mud, making them ideal for sloppy conditions and cyclocross. They keep your feet close to the axles for maximum pedal power, too.

Crank Brothers' Eggbeaters are 4-sided, which makes them super easy to enter and exit. Plus, their open design sheds mud so they work great in all conditions. And, the Eggbeater 1s feature chromoly axles, stainless-steel springs, steel bodies and 6 degrees of float.

Crank Brothers' Eggbeater pedals are 4-sided, making them super easy to enter and exit. Plus, their open design sheds mud so they work great in all conditions. And, the Eggbeater 3s feature chromoly axles, stainless-steel springs, strong cast steel bodies and wings, inner needle bearings, and 6 degrees of float. Crank Brothers has also made the Eggbeater internals water-tight for excellent durability.

Pre-cut traction tabs designed to integrate with the Highline remote lever and increase grip for ultimate control.

Dimension Nylon Basic Toe Straps -Durable metal buckle -Multi-purpose strap can also be used as a lash strap for bike touring or rear rack (caution must be used to keep the strap tail out of the wheel) - 450mm

- Plastic nylon molded body - Chromoly spindle - 318g pair

Protect the soles of your shoes with the Shoe Shields from Crank Brothers. These stainless-steel plates install under your cleats and prevent the pedal from digging in to your carbon-soled shoes. - Sold in pairs

Crank Brothers' Tread Contact Sleeves shim the area between the pedal and your shoes' tread so there is no rocking or play when you're clipped in. They provide a solid platform to put down all your power! They work with either your Eggbeaters or Candy pedals, and each includes 1mm, 2mm, and 3mm shims.

Shorter 7mm rear load pins for the outer extremities of SPOON, SPIKE, and OOZY pedals. - Provide durability and improved safety - Mix and match with the longer stock pins to customize your ideal amount of grip

Polyurethane pads with diamond plate traction pattern allow riders to customize their pedals for a perfect interface with any shoe. - Kit includes eight 1mm traction pads and eight 2mm traction pads

Dimension Junior Pedals. - Molded nylon, 1-piece, caged-type pedals - Built-in reflectors, will not accept toe clips - Overall pedal size is 80 x 60mm - Pedal Body Material: Plastic - Pedal Spindle: 9/16-inch or 1/2-inch - Pedal Type: Platform - Spindle Material: Chromoly Steel - Weight: 230g (9/16-inch); 304g (1/2-inch)

Dimension Mini Toe Clips - Toe clips do not accept toe straps - Sold as a pair - Mounting hardware for the toe-clip is included

Dimension Toe Straps. - Durable metal buckle - Multi-purpose strap can also be used as a lash strap for bike touring or rear rack (caution: must be used to keep the strap tail out of the wheel) - 440mm length

Dimension Toe Clips and Straps Set. Includes: - 4 bolts - 4 nuts (washers included) - 2 nylon toe straps - 2 toe clips

RaceFace Chester Pedal Pin Kit 20 Pins Black

IGUS Bushing replacements for your Spike or Oozy pedals help to eliminate any play that develops over time, and revive smooth spinning action. - 2pcs IGUS self lubricating bushing - 2pcs O-ring - 2pcs stainless shim washer

Longer rear load pins for the outer extremities of your pedals provide ultimate durability, while shorter front load center pins create a virtual concavity in the pin pattern, increasing grip without sacrificing pedal body thinness. - 28pcs rear load pins - 16pcs front load pins - Tool included

- City/road half clips - With reflectors - No straps needed - Resin

- Heavy-duty nylon toe straps with classic style steel buckles - Narrow design fits most cage style pedals - 460mm length

- Nylon construction - Intended for use with double-strap toe straps (sold separately) - Includes mounting hardware - 36 grams per pair

Eliminate cleat wear and improve walking comfort and safety with these Exustar cleat covers. - Compatible with Exustar cleat C01, C03, and C05 - Durable and flexible rubber - Can be used with either floating or fixed position cleats - Weight of only 14 grams/pair

Crank Brothers' 5050 Pin Kit includes fifty 8mm-long steel pins that let you customize the traction on your 5050 or Mallet pedals. Thread lock is pre-applied to every pin.

- One-piece resin body - Chromoly spindle - Toe clip compatible - 366g pair

Replacement pin set for Race Face Atlas and Aeffect pedals.

Replacement bearings and bushings specific to Spoon 90 (Small) and 100/110 (Medium and Large) pedals. Eliminates play that can develop over time, and revives performance. Includes: - Sealed Bearing x2pcs - 10mm IGUS Bushing x2pcs - Green Friction Seal x2pcs - Locknut - O-ring x 2pcs

- Cleat covers to avoid wear and provide stability and grip while walking - Lightweight, flexible and durable

One of the most successful and popular pedals, and for good reason with its extremely simple, lightweight, inexpensive and famously durable plastic-bodied design. Often duplicated but never replicated. - High-strength plastic composite

- Nylon clips - Woven straps - For ATB or hybrid use

- One-piece ABS resin body - Non-slip rubber surface - Boron spindle - 388g pair

- One-piece ABS resin body - Molded pins - 320g pair